3/4" x 1/2" Merrill Pressure Relief Valve Brass Body NPT PRVNL75 No Lead 75 PSI

Description

Merrill
Pressure Relief Valve
These are
NEW, Valve
from Merrill, never used or damaged.
Info:
Recommended for all cold water system installations - to protect against damage to piping and pressure tanks, PRV are set at 75 psi or 100 psi - adjustable from 75 to 150 psi PRV have a +/- 15% setting accuracy
Set at 75 psi
Note: These valves are not T&P valves that are required with water heaters, there is the same need for PRV on cold water pressure tanks
Note: Merrill pressure relief valves may not reseat themselves after pressure relief, manual disassembly and reseating of valve may be required, repeated opening of a pressure relief valve is beyond intended use and voids warranty
Warning: All PRV and PRVHD valves must be set a minimum of 15 psi above the typical high of the water system pressure, so valve chatter or rapid open and close will not occur, valve chatter can cause failure of the valve and voids warranty
Note: All PRV valves are field adjustable - by removing cap and turning internal disk down to increase pressure, field adjustment of valve voids warranty
Note: Valve warranty void after change in adjustment due to possible error
No lead
Body Material
BRASS
Dimensions
2-1/2 in H
Domestic / Import
Domestic
End Style
NPT
Manufacturer
Merrill
Manufacturer #
PRVNL75
Nominal Size
3/4 x 1/2 in
Buyer Information:
We will ship your item(s) after your payment has been cleared, to a confirmed address.
If an item arrives damaged, keep everything sent to you, and contact us within 30 days after receiving item.
UE62
BB
If you are satisfied with your transaction with us, please leave your comment and we will be sure to reciprocate.
Please contact us with any concerns before leaving neutral or negative feedback, we will ensure complete satisfaction.